The Royal-model company was founded in 2002. Its main production programme is a design and manufacture of almost ready to fly radio control sailplanes and electric-powered models. The firm`s strategy is based on the precision, quality and good flying characteristics of the models.

Royal-model kits / stavebnice Royal-model


ARF kits, all fiberglass models

Fiberglass fuselages / laminátové trupy (only  in Czech / pouze česky)

Laminátové trupy pro  stavbu Vašeho modelu, ARC stavebnice


SZD-56 Diana 2                                       

All fiberglass semi-scale sailplane

 This is a 1:4 scale Diana 2 model of this popular sailplane. It has been designed for general sport flying with the latest technology for aerodynamic performance. Diana 2 is made using 100% molded technology. This Diana 2 can be flown as a sport sloper or thermal  soaring model and has a wide speed envelope. Diana 2 uses an airfoil 10,8%. Thus, you will be able to fly slowly in thermals, rapidly in speed runs, and a good glide ratio for distance flying. This broad speed range allows to enjoy a versatile glider. Diana 2 handles beautifully while circling in thermals and is very gentle on final approach and landing. This all molded kit is coming with a high quality white epoxy fiberglas fuselage, and has the wing joiner carrying tube installed. The fiberglas molded with carbon reinforced wings are finished and control surfaces a live hinged, no additional work is required on the wings, except installing the wing servos and respective linkages. The elevator is finished all molded, the rudder is finished too. Only a few hours are required to finish this glider. Detailed instructions and a hardware package are completing the kit.The model is designed to be used by advanced modelers.

Content: Epoxy glass fuselage, hollow molded epoxy glass wings and tail, double-high airbrakes installed, clear canopy, hardware, stickers,  instruction

Wingspan: 3750 mm Lenght: 1700 mm Wing area: 63 dm2  Weight (empty): 2600 g Aerofoil: HN-203 Funktions: ailerons ,elevator, rudder, flaps, airbrakes


ASW-28-18                                       

All fiberglass semi-scale sailplane

 ASW 28-18 is a 1/4,4 scale all fiberglass sailplane of the ASW-28 with 18m wings from Alexander Schleicher GmBh. ASW 28-18 is designed for the experienced pilots. Whether you prefer thermal soaring or slope soaring, this model is made for you. Top quality hardware.

Content: Epoxy glass fuselage, hollow molded epoxy glass wings and tail, double-high airbrakes installed, clear canopy, hardware, stickers,  instruction

Wingspan: 4090 mm Lenght: 1505 mm Wing area: 58,8 dm2 Weight: 4000 g Aerofoil: HQ 3/12 Funktions:ailerons, elevator, rudder, airbrakes

Reviews: Modell Aviator 2/2006, Modell 9/2005


DG-1001                                       

All fiberglass semi-scale sailplane

  This is an absolute gorgeous reproduction of the famous DG-1001 from DG Flugzeugbau GmbH from Germany. You have here an accurate 1:8 scale version, in all molded technology. At 1:8 scale this should be a small scale glider, but the high aspect ratio of the wing makes it still a comfortable sized plane of 2.5 m span. Original forward swept wing plan-form, double taper elevator, installed airbrakes.
Designated for the intermediate pilot this is not the easiest plane to fly. It can be pitch sensitive at high speed. But heck what a great look in the air. Suitable for aerobatics, it has also a realistic wing flex in the air. The wing does not have flaps. It can be histarted, winched or aero towed. Also nice on the slope.Radio requirements are four micro servos for the ailerons and airbrakes, one micro for the elevator, one for the rudder. An additional servo might be installed for aerotow.

Content: Epoxy glass fuselage with a white epoxy gelcoat, epoxy glass wings and tail, double-high airbrakes installed, clear canopy, canopy frames, winglets, hardware, stickers, instruction   

Wingspan: 2500 mm Lenght: 1090 mm Wing area: 32 dm2 Weight (empty):  970 g Aerofoil: S3021 Funktions: ailerons, elevator, rudder, airbrakes


ASG-29                                            

semi-scale sailplane

 This is a 1/3,75 semi scale model of the ASG-29 by Alexander Schleicher GmBh. It is an ARF sailplane with foam/abachisheeted wings covered with ironing foil. The major components are built. The size 4m is an excellent choice for thermal soaring. The HQ airfoil offers very smooth and forgiving flying characteristics.ASG-29 is designed for the experienced pilots. Whether you prefer thermal soaring or slope soaring, this model is made for you.

Content: Epoxy glass fuselage with a white epoxy gelcoat,  foam/abachi wing covered with covering film, double-high airbrakes installed, epoxy glass tail, molded winglets, clear canopy, frame, hardware, stickers, instruction  

Wingspan:  4000 mm Lenght: 1720 mm Wing area: 64 dm2 Weight (empty): 3500 g Aerofoil: HQ 2,5/14 Funktions: ailerons, elevator,  rudder, flaps, airbrakes


DG-808                                            

semi-scale sailplane

 This is a 1/4 semi scale model of the DG-808 by DG Flugzeugbau GmbH from Germany. It is an ARF sailplane with foam/abachi sheeted wings covered with ironing foil. The major components are built. The size 4,5m is an excellent choice for thermal soaring. The HQ airfoil offers very smooth and forgiving flying characteristics. DG-808 is designed for the experienced pilots. Whether you prefer thermal soaring or slope soaring, this model is made for you.

Content: Epoxy glass fuselage with a white epoxy gelcoat,  foam/abachi wing covered with covering film, double-high airbrakes installed, fiberglass elevator, molded rudder, molded winglets, clear canopy, frame, hardware, stickers, instruction  

Wingspan: 4500 mm Lenght: 1720 mm Wing area: 76 dm2 Weight (empty): 4700 g Aerofoil: HQ 2,5/14 Funktions: ailerons, elevator, rudder, flaps, airbrakes


SZD-39 Cobra 17                                     

1/5 Semi-scale sailplane

1/5 Semi-scale model of the glider SZD-39 from Poland. Whether you prefer thermal soaring or slope soaring, this model is made for you. Cobra is designed for the experienced pilots.

Content: Epoxy glass fuselage with a white epoxy gelcoat, two-piece wings styro/abachi covered with iron folie, double-high airbrakes installed, fiberglass elevator, molded rudder, clear canopy, frame, hardware, stickers, instruction 

Wingspan: 3400 mm Lenght: 1400 mm Wing area: 56 dm2 Weight (empty): 2800 g Aerofoil: HN-163 Funktions: elevator, rudder, ailerons, spoilers


Pilatus B4                                            

1/5 Semi-scale sailplane

 This kit is a nice semi-scale reproduction of this famous airplane from Swiss, great handling on the slope, very aerobatic, good versatility, nice on tow as well. Will of course winch as well. Pilatus B4 is designed for the experienced pilots.

Content: Gel-coated fiberglass fuselage, foam/abachi two-piece wings covered with iron folie, double-high airbrakes installed, fiberglasss elevator and rudder, canopy frame, clear canopy, hardware, stickers, instruction  

Wingspan: 3000 mm Lenght: 1320 mm Wing area: 56,6 dm2 Weight (empty): 2800 g Aerofoil: HQ 2/12 Funktions: ailerons, elevator, rudder, spoilers


Snipp 2.0                                            

All fiberglass small electric-powered hotliner

Agile sailplane, hotliner, sport pylon this is a versatile and fun airplane. Ideal choose for pilots which are crazy to dynamic experience. Succesfull aerodynamic design and utter quality guarantie excellent performance. Snipp is made with molded wing with a carbon spar, fiberglass fuselage and tail. Snipp is designed for the experienced pilots.

Content: Fiberglass fuselage, hollow molded fiberglass wings and elevator, hardware, instruction

Wingspan: 1300 mm Lenght: 840 mm Wing area: 18 dm2 Weight (empty): 400 g Aerofoil: 7,5% Power: < 500W, 3-4 Lipol Funktions:ailerons, elevator,  motor


Beat                                            

All fiberglass slope sailplane or hotliner

 Beat is very happy on the slope, or cut off the nose and put some E-power for some real exciting times.mIt has wide speed range and flaps for controlled landings.The wing is hollow molded  fiberglass, all surfaces are live hinged and very strong. The Beat is sporting an MH-43 airfoil which has proven itself as an excellent all round foil capable of flying in many conditions. The Beat electro is designed to use a lightweight engine and light batteries. The recommended engine is AXI 28/20/10, LiPol 3s 2400mAh, propeller 12/6, controller Jeti Spin 66A. Current is 40A and a very good rising. With the same engine and propeller, but with LiPol 4s, rises perpendicularlyBeat is designed for the experienced pilots. Whether you prefer thermal soaring or slope soaring, this model is made for you.

Content: Epoxy glassfuselage, fiberglass wings with a carbon spar, epoxy glass elevator, hardware,  instruction  

Wingspan: 2110 mm Lenght: 1190 mm Wing area: 35 dm2 Weight (empty): 900 g Aerofoil: MH-43 7,9% Funktions:elevator, ailerons, flaps, (motor)


Energy E                                            

All fiberglass hotliner for sports flyers

 This high performance mini hotliner will delight you with its speed and agility. The construction of the model is fully designed for this type of flying, fully moulded with glass & carbon in some parts. The wing is a one-part design and is reinforced by a carbon beam. The HN-354 airfoil was chosen for its great range of speeds and generally good characteristics.Ideal choose for pilots which are crazy to dynamic experience. Succesfull aerodynamic design and utter quality guarantie excellent performance.

Content: Fiberglass fuselage , fiberglass wing with carbon spar, tail surfaces, hardware, instruction

Wingspan: 1500 mm Lenght: 930 mm Wing area: 25 dm2 Weight (empty): 450 g Aerofoil: 8% Funktions: ailerons, elevator,  motor